Zippkits Hulls
Easy Vee
Rockett Hydro
IMPBA Crackerbox
NAMBA Crackerbox
Length: 46.5 inches
Beam: 13 inches
Engine: Gas w/5 inch mounts
Radio: 2 Channel Surface
Weight: 12-16 pounds
The Easy Vee was designed specifically for the first time builder.
Extremely easy to build and equally suited for sport use or racing.
Featuring a deep vee bottom, the Easy Vee handles rough water, and turns like a race boat should.
The kit includes:
CNC cut 1/8 birch for bulkheads, top, bottom and side sheeting
CNC cut 1/8 birch radio box
CNC cut 1/4 inch marine ply engine rails
CNC cut 1/16 ply radio box top
CNC cut Building jig
Basswood for stringers
Comprehensive, step by step illustrated building instructions
Finishing, setup and running instructions
Stock number MM7404
US $59.00
Shipping $14.00 in US 48 States
If outside the US, please Email us for a shipping quote.
See videos at youtube.com Search for zippkits
The specs are as follows:
Length- 47 inches
Beam- 22 inches
Weight- 14-16 pounds
IMPBA and NAMBA legal (Except NAMBA D-19)
Engine- Zenoah, Quickdraw, sikk
Radio- 2 channel (Rudder, Throttle)
Includes:
CNC cut Birch ply and Poplar lite ply parts
Turn fin and bracket w/stainless attachment hardware
Fiberglass cowling
Photo illustrated step by step instruction manual
Rockett Kit
Stock Number MM7502
US $179.00
Shipping $22.00 in US 48 (two boxes)
Length: 46 inches
Beam: 17 inches
Engine: Gas w/5 inch mounts
Radio: 2 Channel Surface
The IBox was designed specifically for IMPBA Crackerbox racing.
It meets all requirements for the Crackerbox racing classes.
The kit includes:
CNC cut 1/8 birch for bulkheads, top, bottom and side sheeting
CNC cut 1/8 birch radio box
CNC cut 1/4 inch birch ply engine rails
CNC cut 1/16 ply radio box top
CNC cut Building jig
Basswood for stringers
Aluminum skeg with stainless mounting hardware
Comprehensive, step by step illustrated building instructions
Finishing, setup and running instructions
Not shown (but included) is the building jig, instruction manual, basswood stringers and stainless skeg hardware.
Stock number MM7402
US $81.00
Shipping $16.00 in US 48 States
Not shown (but included) is the building jig, instruction manual, basswood stringers and stainless skeg hardware.
Length: 46 inches
Beam: 17 inches
Engine: Gas w/5 inch mounts
Radio: 2 Channel Surface
The NBox was designed specifically for NAMBA Crackerbox racing.
It meets all requirements for Classic as well as Standard Crackerbox racing classes.
The kit includes:
CNC cut 1/8 Birch ply for bulkheads, top, bottom and side sheeting
CNC cut 1/8 Birch ply radio box
CNC cut 1/4 inch birch ply engine rails
CNC cut 1/16 ply radio box top
CNC cut Building jig
Basswood for stringers
Aluminum skeg with stainless mounting hardware
Comprehensive, step by step illustrated building instructions
Finishing, setup and running instructions
Stock number MM7401
US $81.00
Shipping $16.00 in US 48 States
